Filter
Top Products
-154
redistribute
Use this command to import external routing information from other
routing domains (i.e., protocols) into the autonomous system. Use the no
form to disable this feature.
Syntax
redistribute [rip | static] [metric metric-value] [metric-type type-value]
no redistribute [rip | static] [metric metric-value] [metric-type
type-value]
• rip - External routes will be imported from the Routing Information
Protocol into this Autonomous System.
• static - Static routes will be imported into this Autonomous System.
• metric-value - Metric assigned to all external routes for the specified
protocol. (Range: 1-65535: Default: 10)
•type-value
• 1 - Type 1 external route
• 2 - Type 2 external route (default) - Routers do not add internal
route metric to external route metric.
Command Mode
Router Configuration
Default Setting
redistribution - none
protocol - RIP and static
metric-value - 0
type-metric - 2
Command Usage
• This router supports redistribution for both RIP and static routes.
• When you redistribute external routes into an OSPF autonomous
system (AS), the router automatically becomes an autonomous system
boundary router (ASBR). If the redistribute command is used in
conjunction with the default-information originate command to
generate a “default” external route into the AS, the metric value
specified in this command supersedes the metric specified in the
default-information originate command.