![](http://pdfasset.owneriq.net/6/90/69029205-8bce-4051-bf2a-3f7a074bd3a4/69029205-8bce-4051-bf2a-3f7a074bd3a4-bg176.png)
C
ONFIGURING
THE
S
WITCH
3-320
(page 3-324) or PIM (page 3-335), and specify the interfaces that will
participate (page 3-329 or 3-336). Note that you can only enable one
multicast routing protocol on any given interface.
Web – Click IP, Multicast Routing, General Setting. Set Multicast
Forwarding Status to Enabled, and click Apply.
CLI – This example enables multicast routing globally for the router.
Console(config)#ip multicast-routing3-187
Console(config)#