VLAN C
OMMANDS
-57
Configuring VLAN Interfaces
interface vlan
This command enters interface configuration mode for VLANs, which is
used to configure VLAN parameters for a physical interface.
Syntax
interface vlan vlan-id
vlan-id - ID of the configured VLAN. (Range: 1-4094, no leading
zeroes)
Default Setting
None
Command Mode
Global Configuration
Command Function Mode Page
interface vlan Enters interface configuration mode for a
specified VLAN
IC 3-57
switchport mode Configures VLAN membership mode for an
interface
IC 3-58
switchport
acceptable-frame-types
Configures frame types to be accepted by an
interface
IC 3-59
switchport
ingress-filtering
Enables ingress filtering on an interface IC 3-60
switchport native vlan Configures the PVID (native VLAN) of an
interface
IC 3-61
switchport allowed vlan Configures the VLANs associated with an
interface
IC 3-62
switchport gvrp Enables GVRP for an interface IC 3-73
switchport forbidden
vlan
Configures forbidden VLANs for an interface IC 3-63