![](http://pdfasset.owneriq.net/6/90/69029205-8bce-4051-bf2a-3f7a074bd3a4/69029205-8bce-4051-bf2a-3f7a074bd3a4-bg310.png)
-202
show ip dvmrp interface
Use this command to display the DVMRP configuration for interfaces
which have enabled DVMRP.
Command Mode
Normal Exec, Privileged Exec
Example
PIM-DM Multicast Routing Commands
Console#show ip dvmrp interface
Vlan 1 is up
DVMRP is enabled
Metric is 1
Console#
Command Function Mode Page
router pim Enables PIM globally for the router GC 3-203
ip pim dense-mode Enables PIM on the specified interface IC 3-204
ip pim hello-interval Sets the interval between sending PIM hello
messages
IC 3-205
ip pim hello-holdtime Sets the time to wait for hello messages from a
neighboring PIM router before declaring it dead
IC 3-206
ip pim
trigger-hello-interval
Sets the maximum time before sending a
triggered PIM Hello message
IC 3-206
ip pim
join-prune-holdtime
Configures the hold time for the prune state IC 3-207
ip pim
graft-retry-interval
Configures the time to wait for a Graft
acknowledgement before resending a Graft
message
IC 3-208
ip pim max-graft-retries Configures the maximum number of times to
resend a Graft message if it has not been
acknowledged
IC 3-209
show router pim Displays the global PIM configuration settings NE,
PE
3-209