![](http://pdfasset.owneriq.net/6/90/69029205-8bce-4051-bf2a-3f7a074bd3a4/69029205-8bce-4051-bf2a-3f7a074bd3a4-bg311.png)
M
ULTICAST
R
OUTING
C
OMMANDS
-203
router pim
Use this command to enable Protocol-Independent Multicast - Dense
Mode (PIM-DM) globally for the router and to enter router configuration
mode. Use the no form to disable PIM-DM multicast routing.
Syntax
router pim
no router pim
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
This command enables PIM-DM globally for the router. You also need
to enable PIM-DM for each interface that will support multicast
routing using the ip pim dense-mode command (page 3-204), and
make any changes necessary to the multicast protocol parameters.
Example
show ip pim interface Displays information about interfaces configured
for PIM
NE,
PE
3-210
show ip pim neighbor Displays information about PIM neighbors NE,
PE
3-210
Console(config)#router pim
Console#show router pim
Admin Status: Enabled
Console#
Command Function Mode Page