![](http://pdfasset.owneriq.net/6/90/69029205-8bce-4051-bf2a-3f7a074bd3a4/69029205-8bce-4051-bf2a-3f7a074bd3a4-bg32d.png)
R
OUTER
R
EDUNDANCY
C
OMMANDS
-231
Example
Related Commands
standby priority (3-227)
standby timers
Use this command to set the time between the master and standby router
sending hello packets, and the time before other routers declare the active
master router or standby router down. Use the no form to restore the
default timer values.
Syntax
standby [group] timers hellotime holdtime
no standby [group] timers
• group - Identifies the HSRP group. (Range: 0-255)
• hellotime - Advertisement interval for the master and standby virtual
router. (Range: 1-254 seconds)
• holdtime - Time before the master or standby router is declared down.
(Range: hellotime+1 to 255 seconds)
Default Setting
Group number: 0
Hellotime: 3 seconds
Holdtime: 10 seconds
Command Mode
Interface (VLAN)
Command Usage
• HSRP advertisements from the master and standby virtual router
include information about their priority, timer values, and current state
as the master or standby router.
Console(config-if)#standby 1 authentication bluebird
Console(config-if)#