![](http://pdfasset.owneriq.net/6/90/69029205-8bce-4051-bf2a-3f7a074bd3a4/69029205-8bce-4051-bf2a-3f7a074bd3a4-bg2b6.png)
-112
reduced value results in reduced time to detect the loss of the last
member of a group.
Example
The following shows how to configure the maximum response time to
10 seconds:
ip igmp version
Use this command to configure the IGMP version used on an interface.
Use the no form of this command to restore the default.
Syntax
ip igmp version {1 | 2}
no ip igmp version
• 1 - IGMP Version 1
• 2 - IGMP Version 2
Default Setting
IGMP Version 2
Command Mode
Interface Configuration (VLAN)
Command Usage
• All routers on the subnet must support the same version. However, the
multicast hosts on the subnet may support either IGMP version 1 or 2.
• The switch must be set to version 2 to enable the ip igmp
max-resp-interval (page 3-110).
Console(config-if)#ip igmp last-memb-query-interval 10
Console(config-if)#