-216
Example
Related Commands
vrrp preempt (3-217)
vrrp timers advertise
Use this command to set the interval at which the master virtual router
sends advertisements communicating its state as the master. Use the no
form to restore the default interval.
Syntax
vrrp group timers advertise interval
no vrrp group timers advertise
• group - Identifies the VRRP group. (Range: 1-255)
• interval - Advertisement interval for the master virtual router.
(Range: 1-255 seconds)
Default Setting
1 second
Command Mode
Interface (VLAN)
Command Usage
• VRRP advertisements from the current master virtual router include
information about its priority and current state as the master.
• VRRP advertisements are sent to the multicast address 224.0.0.8. Using
a multicast address reduces the amount of traffic that has to processed
by network devices that are not part of the designated VRRP group.
• If the master router stops sending advertisements, backup routers will
bid to become the master router based on priority. The dead interval
Console(config-if)#vrrp 1 priority 1
Console(config-if)#