SMC Networks SMC8612XL3 F 1.0.1.3 Switch User Manual


 
C
ONFIGURING
THE
S
WITCH
3-104
CLI – The following example configures LACP parameters for ports 1-6.
Ports 1-4 are used as active members of the LAG; ports 5 and 6 are set to
backup mode.
Displaying LACP Port Counters
You can display statistics for LACP protocol messages.
Counter Information
Console(config)#interface ethernet 1/13-1
Console(config-if)#lacp actor system-priority 33-24
Console(config-if)#lacp actor admin-key 1203-25
Console(config-if)#lacp actor port-priority 1283-27
Console(config-if)#exit
.
.
.
Console(config)#interface ethernet 1/6
Console(config-if)#lacp actor system-priority 3
Console(config-if)#lacp actor admin-key 120
Console(config-if)#lacp actor port-priority 512
Console(config-if)#end
Console#show lacp sysid3-28
Channel Group System Priority System MAC Address
-------------------------------------------------------------------------
1 32768 00-00-E9-31-31-31
2 32768 00-00-E9-31-31-31
3 32768 00-00-E9-31-31-31
4 32768 00-00-E9-31-31-31
5 32768 00-00-E9-31-31-31
6 32768 00-00-E9-31-31-31
Console#show lacp 1 internal3-28
Channel group : 1
-------------------------------------------------------------------------
Oper Key : 120
Admin Key : 120
Console#
Parameter Description
LACPDUs Sent Number of valid LACPDUs transmitted from this channel
group.
LACPDUs Received Number of valid LACPDUs received by this channel group.
Marker Sent Number of valid Marker PDUs transmitted from this channel
group.
Marker Received Number of valid Marker PDUs received by this channel
group.