C
OMMAND
L
INE
I
NTERFACE
4-110
Default
30 seconds
Command Mode
Global Configuration
Example
show dot1x
This command shows general port authentication related settings on the
switch or a specific interface.
Syntax
show dot1x [statistics] [interface interface]
interface
• ethernet unit/port
- unit - This is device 1.
- port - Port number.
Command Mode
Privileged Exec
Command Usage
This command displays the following information:
• Global 802.1X Parameters – Displays the global port access control
parameters that can be configured for this switch as described in the
preceding pages, including reauth-enabled (page 3-108),
reauth-period (page 3-109), quiet-period (page 3-108), tx-period
(page 3-109), and max-req (page 3-105). It also displays the
Console(config)#dot1x timeout tx-period 300
Console(config)#