![](http://pdfasset.owneriq.net/6/90/69029205-8bce-4051-bf2a-3f7a074bd3a4/69029205-8bce-4051-bf2a-3f7a074bd3a4-bg1b8.png)
C
OMMAND
L
INE
I
NTERFACE
4-44
copy tftp https-certificate (3-85)
ip http secure-port
This command specifies the UDP port number used for HTTPS/SSL
connection to the switch’s web interface. Use the no form to restore the
default port.
Syntax
ip http secure-port port_number
no ip http secure-port
port_number – The UDP port used for HTTPS/SSL.
(Range: 1-65535)
Default Setting
443
Command Mode
Global Configuration
Command Usage
• You cannot configure the HTTP and HTTPS servers to use the same
port.
• If you change the HTTPS port number, clients attempting to connect
to the HTTPS server must specify the port number in the URL, in this
format:
https://device:port_number
Example
Related Commands
ip http secure-server (3-42)
Console(config)#ip http secure-port 1000
Console(config)#