Sun Microsystems SL8500 Computer Drive User Manual


 
96154 Revision K 75
CHAPTER
5
Cartridge Information
This chapter describes how to handle, inspect, and maintain cartridges.
Cartridge Requirements
Cartridges must meet specifications defined in American National Standard Magnetic Tape
and Cartridge for Information Interchange.
Refer to your drive vendor’s publication and Web site for specific cartridge
requirements and specifications.
Colored cartridges are approved only if the measured reflection density is greater than
0.1 as measured by an X-rite 404G color reflection densitometer. For more information
about colored cartridges, contact your Sun StorageTek representative.
Colored measurements are:
For more information about colored cartridges, contact your Sun StorageTek
representative.
Ordering Cartridges and Labels
Contact your authorized Sun StorageTek Selling Agent for labeled cartridges.
For cartridge labels, contact EDP/Colorflex at:
Phone: 1.888.438.8362 (domestic and international)
Web site: http://www.colorflex.com
Bandwidth ANSI Status T Wide band (380 to 780 nm)
Measuring range Density (0.00 to 2.50) D
Accuracy ±0.02 D
Repeatability ±0.01 D
Aperture diameter 3.4 mm (0.13in.)