Filter
Top Products
Storage Expansion Modules
96154 • Revision K Chapter 1 Introduction 17
Note – A CAP will not operate unless the library is in the automated mode.
Storage Expansion Modules
Besides the basic configuration, up to five Storage Expansion Modules may be added
per library to increase capacity. These expansion modules are installed between the
Robotics Interface Module and the Customer Interface Module.
Each Storage Expansion Module can contain up to 1,728 data cartridge slots.
Power
There are five (5) power grids that distribute power throughout the library. Two of the
power grids carry 220 VAC; the other three carry 48 VDC.
FIGURE 1-7 CAP
The CAP spans across three rails—2, 3, and 4 (LSMs 1, 2, and 3).
1
2
3
4
1
2
3
4 Rails
3 CAP
Ma
g
azin
e