Filter
Top Products
PathName = "/opt/VRTSat/bin/vxatd"
)
// resource dependency tree
//
// group VxSS
// {
// Phantom phantom_vxss
// ProcessOnOnly vxatd
// }
Verifying the LLT, GAB, and VCS configuration files
MakesurethattheLLT,GAB,and VCSconfigurationfilescontaintheinformation
you provided during VCS installation and configuration.
To verify the LLT, GAB, and VCS configuration files
1
Navigate to the location of the configuration files:
■ LLT
/etc/llthosts
/etc/llttab
■ GAB
/etc/gabtab
■ VCS
/etc/VRTSvcs/conf/config/main.cf
2
Verify the content of the configuration files.
See “About the LLT and GAB configuration files” on page 105.
See “About the VCS configuration file main.cf” on page 107.
Verifying LLT, GAB, and cluster operation
Verify the operation of LLT, GAB, and the cluster using the VCS commands.
To verify LLT, GAB, and cluster operation
1
Log in to any node in the cluster as superuser.
2
Make sure that the PATH environment variable is set to run the VCS
commands.
See “Setting the PATH variable” on page 47.
113Verifying the VCS installation
Verifying the LLT, GAB, and VCS configuration files