Filter
Top Products
Enter the SNMP console system name: [b,?] saturn
■ Enter the minimum security level of messages to be sent to each console.
Enter the minimum severity of events for which SNMP traps
should be sent to saturn [I=Information, W=Warning, E=Error,
S=SevereError]: [b,?] E
4
Add more SNMP consoles, if necessary.
■ Ifyou wantto addanother SNMPconsole, entery andprovide therequired
information at the prompt.
Would you like to add another SNMP console? [y,n,q,b] (n) y
Enter the SNMP console system name: [b,?] jupiter
Enter the minimum severity of events for which SNMP traps
should be sent to jupiter [I=Information, W=Warning,
E=Error, S=SevereError]: [b,?] S
■ If you do not want to add, answer n.
Would you like to add another SNMP console? [y,n,q,b] (n)
5
Verify and confirm the SNMP notification information.
SNMP Port: 162
Console: saturn receives SNMP traps for Error or
higher events
Console: jupiter receives SNMP traps for SevereError or
higher events
Is this information correct? [y,n,q] (y)
Configuring global clusters
If you had installed a valid HA/DR license, the installer provides youan option to
configure this cluster as global cluster. If not, the installer proceeds to configure
VCS based on the configuration details you provided. You can also run the
gcoconfig utility in each cluster later to update the VCS configuration file for
global cluster.
You canconfigure globalclusters to linkclusters atseparate locationsand enable
wide-area failover and disaster recovery. The installer adds basic global cluster
Installing and configuring VCS
Installing and configuring VCS 5.0 RU3
74