Filter
Top Products
To verify GAB
1
To verify that GAB operates, type the following command on each node:
/sbin/gabconfig -a
2
Review the output of the command:
■ If GAB operates, the following GAB port membership information is
returned:
GAB Port Memberships
===================================
Port a gen a36e0003 membership 01
Port h gen fd570002 membership 01
■ If GAB does not operate, the command does not return any GAB port
membership information:
GAB Port Memberships
===================================
■ Ifonly onenetwork isconnected, thecommand returns thefollowing GAB
port membership information:
GAB Port Memberships
===================================
Port a gen a36e0003 membership 01
Port a gen a36e0003 jeopardy 1
Port h gen fd570002 membership 01
Port h gen fd570002 jeopardy 1
Verifying the cluster
Verify the status of the cluster using the hastatus command. This command
returns the system state and the group state.
Refer to the hastatus(1M) manual page.
Refer to the VeritasCluster Server User's Guide for a description of system states
and the transitions between them.
117Verifying the VCS installation
Verifying LLT, GAB, and cluster operation