Filter
Top Products
■ If you do not want to add, answer n.
Would you like to add another SMTP recipient? [y,n,q,b] (n)
5
Verify and confirm the SMTP notification information.
SMTP Address: smtp.example.com
Recipient: ozzie@example.com receives email for Warning or
higher events
Recipient: harriet@example.com receives email for Error or
higher events
Is this information correct? [y,n,q] (y)
Configuring SNMP trap notification
Youcanchoose toconfigure VCStosend eventnotifications toSNMPmanagement
consoles.Youneed toprovide theSNMPmanagement consolenameto benotified
and message severity levels.
Note that you can also configure the notification after installation.
Refer to the Veritas Cluster Server User's Guide for more information.
To configure the SNMP trap notification
1
Review the required information to configure the SNMPnotification feature
of VCS.
2
Specify whether you want to configure the SNMP notification.
Do you want to configure SNMP notification? [y,n,q] (y)
If you skip this option and if you had installed a valid HA/DR license, the
installerpresents youwith anoption toconfigure thiscluster asglobal cluster.
If you did not install an HA/DR license, the installer proceeds to configure
VCS based on the configuration details you provided.
See “Configuring global clusters” on page 74.
3
Provide information to configure SNMP trap notification.
Provide the following information:
■ Enter the SNMP trap daemon port.
Enter the SNMP trap daemon port: [b,?] (162)
■ Enter the SNMP console system name.
73Installing and configuring VCS
Installing and configuring VCS 5.0 RU3