Filter
Top Products
# rpm -i VRTScutil-5.0.33.00-RU3_GENERIC.noarch.rpm
# rpm -i VRTSatClient-4.3.28.0-0.ppc.rpm
# rpm -i VRTSatServer-4.3.28.0-0.ppc.rpm
■ SLES10/ppc64, required RPMS
# rpm -i VRTSvlic-3.02.33.4-0.ppc64.rpm
# rpm -i VRTSperl-5.10.0.1-SLES10.ppc64.rpm
# rpm -i VRTSspt-5.5.00.0-GA.noarch.rpm
# rpm -i VRTSllt-5.0.33.00-RU3_SLES10.ppc64.rpm
# rpm -i VRTSgab-5.0.33.00-RU3_SLES10.ppc64.rpm
# rpm -i VRTSvxfen-5.0.33.00-RU3_SLES10.ppc64.rpm
# rpm -i VRTSvcs-5.0.33.00-RU3_SLES10.ppc64.rpm
# rpm -i VRTSvcsag-5.0.33.00-RU3_SLES10.ppc64.rpm
# rpm -i VRTSvcsdr-5.0.33.00-RU3_SLES10.ppc64.rpm
# rpm -i VRTScutil-5.0.33.00-RU3_GENERIC.noarch.rpm
# rpm -i VRTSatClient-4.3.28.0-0.ppc.rpm
# rpm -i VRTSatServer-4.3.28.0-0.ppc.rpm
Adding a license key
After you have installed all RPMs on each cluster node, use the vxlicinst
command to add the VCS license key on each system:
# cd /opt/VRTS/bin
# ./vxlicinst -k XXXX-XXXX-XXXX-XXXX-XXXX-XXX
Checking licensing information on the system
Use the vxlicrep utility to display information about all Veritas licenses on a
system. For example, enter:
# cd /opt/VRTS/bin
# ./vxlicrep
Fromthe output,you candeterminethe licensekey,thetype oflicense, theproduct
for which it applies, and its expiration date, if any. Demo keys have expiration
dates, while permanent keys and site keys do not.
125Adding and removing cluster nodes
Adding a node to a cluster