Filter
Top Products
set-addr 3 link1 192.1.7.3
set-addr 3 link2 192.1.8.3
#disable LLT broadcasts
set-bcasthb 0
set-arp 0
The /etc/llttab file on Node 0 resembles:
set-node Node0
set-cluster 1
link link1 udp - udp 50000 - 192.1.1.1 -
link link2 udp - udp 50001 - 192.1.2.1 -
#set address of each link for all peer nodes in the cluster
#format: set-addr node-id link tag-name address
set-addr 1 link1 192.1.3.1
set-addr 1 link2 192.1.4.1
set-addr 2 link1 192.1.5.2
set-addr 2 link2 192.1.6.2
set-addr 3 link1 192.1.7.3
set-addr 3 link2 192.1.8.3
#disable LLT broadcasts
set-bcasthb 0
set-arp 0
Performing automated VCS installations
Using installvcs program with the -responsefile option is useful not only for
installing and configuring VCS within a secure environment. This option is also
usefulfor conducting unattendedinstallations to otherclusters aswell. Typically,
you can use the response file generated during the installation of VCS on one
clusterto installVCS on otherclusters. Youcan copythe fileto asystemin another
cluster and manually edit the file to contain appropriate values.
When thesystems are set up and meet the requirements for installation, youcan
perform an unattended installation. You perform the installation fromone of the
cluster systems where you have copied the response file.
Advanced VCS installation topics
Performing automated VCS installations
164