Filter
Top Products
Appendix A: Interfaces
K1297-G20 Monitor User Manual
A-25
The following interfaces are located on the front panel of the AP-4 /
AP-4/256 board:
H Serial interface
H 10BaseT / 100BaseTX
The SERIAL interface (RJ45 connector) can be used as asynchronous
serial debug port for service purposes.
1
Table A–14: Pin assignment for the SERIAL interface (DTE)
Pin Assignment Pin Assignment
1 DCD 5 RxD
2 RTS 6 Ground
3 Ground 7 CTS
4 TxD 8 DTR