Filter
Top Products
Getting Started
K1297-G20 Monitor User Manual
21
CD-RW Drive (Option)
The external CD-RW drive (Plexwriter) from Plextor can be used to write
CDs and as a CD-ROM drive. The CD-RW drive is delivered with the
original Plextor manual. Read this manual carefully. Pay particular
attention to the safety instructions.
For using the CD-RW drive with K1297 Protocol Testers, you should
adhere to the following instructions as well:
H The SCSI-Bus-ID of the CD-RW drive should be set to a value
between 2 and 6. We recommend to set the SCSI-Bus-ID to 3 before
connecting the device. Then, connect one of the two SCSI interfaces of
the CD-RW drive to the SCSI interface of your Protocol Tester using
the supplied cable.
H Do not install the software of the Plextor Software Utilities (Plex
Tools) CD on your Protocol Tester.
H If you like to write CDs with the CD-RW drive you need to install the
delivered Nero burning software. To install this software insert the
NERO Burning ROM (Plextor Version) from AHEAD. The CD starts
automatically and opens the Ahead Installer dialog box. Start the
installation process by clicking the Nero button. We recommend not to
install the following Nero components:
– NeroMediaPlayer
– InCD Packet-Writing
– UDF reader
NOTE. The delivered Nero software is not usable for Windows 3.11
operating systems. Users of Protocol Testers with Windows 3.11 who like
to write CDs are asked to upgrade their devices. Please contact the
Tektronix hotline.