Filter
Top Products
Getting Started
38
K1297-G20 Monitor User Manual
K1297-G20 Monitor Application
The K1297-G20 Monitor application is started with an initial screen which
shows the version number of your application on top of the screen and
information on the load state of the software at the bottom.
Data Flow Window. If you start the autoconfiguration, the autoconfiguration
feature automatically detects the signalling channels and the framing of
the connected data lines. After the autoconfiguration has been carried out,
the active signalling channels are available and you can start the
measurement: the Data Flow Window appears.
There are two different tabs for setting parameters of interface modules,
links and measurement scenarios: Cards Overview and Measure-
ment Scenarios.