Filter
Top Products
Getting Started
12
K1297-G20 Monitor User Manual
3. Take the cable out of the cable box and fold the cable box underneath
the keyboard. The keyboard is now positioned in a working angle in
front of you.
4. Pull on the lower monitor frame to position the monitor in a working
angle. The mains cable must be supplied to the non-heating appliance
socket on the rear of the K1297. The mains plug must be plugged into
a socket with protective ground.
Changing the Fuses for K1297. Spare fuses can you find in the delivered
accessories box. If the fuses need to be changed, proceed as follows:
1. Switch off the device.
2. Disconnect the power cord.
3. The black fuse tray is placed on the right hand side of the mains
switch, on the rear of the device.
Use an appropriate tool, such as a flat screw-driver, insert it into the
slot above the on/off switch. Open the tray, pull the red strip and
exchange the broken fuse.
Make sure to always use two fuses of the proper fuse type and rating.
4. Close the fuse tray.