Filter
Top Products
Getting Started
K1297-G20 Monitor User Manual
59
TCP/IP Protocol. The TCP/IP protocol is configured by default upon
delivery. The IP address is automatically assigned to the network card by a
DHCP server.
If your network does not have a DHCP server, ask your network
administrator for the necessary parameters, such as IP address and subnet
mask. Type in the parameters as follows:
1. Open the General tab of the Local Area Connection Properties dialog
box (see figure 1).
2. Press the Properties button in the General tab of the Local Area
Connection Properties dialog box.
The Internet Protocol (TCP/IP) Properties dialog box opens.
3. Select Use the following IP address and enter your IP address and
Subnet Mask.
4. Press the OK button to close the Internet Protocol (TCP/IP) Properties
dialog box and the Close button to close the Local Area Connection
Properties dialog box.
CAUTION. Only the software components configured upon delivery
guarantee faultless operation of the Protocol Tester.