Filter
Top Products
CHAPTER 5
REPLACEMENT PROCEDURES
This chapter consists of part replacement procedures for those items either found or
suspected of malfunctioning. These procedures cover the items checked during the
troubleshooting presented in the previous chapter. However, this manual does not cover
all components and only represents an attempt toward identifying a potential set of
components. As a result, servicing personal may discover additional items that warrant
procedures.
Eltron Card Printer Products encourages servicing personal to report these and any other
problems in support of continuous product improvement, publication of Tech Notes, and
revision of this manual. For servicing beyond the scope of this and the other P310 Printer
publications, Eltron Card Printer Products offers factory repair and Technical Support
assistance as options.
As with all well-designed products, most parts should remain operational well beyond a
typical product life. Therefore, product abuse may cause most failures. In this regard, the
operating environment most likely acts as the prime factor influencing card-image quality,
with airborne particles the chief cause of problems.
Descriptions show how the various components fasten to the printer and the best
sequence for their removal. This makes the procedures reversible, meaning installation of
a new component typically occurs by reversing of the removal procedure.
980264-001 Rev. B 5-1