Filter
Top Products
CHAPTER 6
MAINTENANCE AND ADJUSTMENTS
This chapter contains procedures for Cleaning and Adjustments. A more thorough
cleaning than the Cleaning Card procedure offered in Chapter 2 appears in this chapter.
Other than roller, Heat Sink, and Print Head cleaning, no other regular maintenance
requirements exist. Under no circumstances should anyone ever apply either a lubricant
or any other unprescribed material to a component inside a P310 printer. To minimize
any chance of a residue, use only 99-percent pure or better cleaning solutions. Moreover,
users must maintain a printing and laminating environment essentially free of
contaminants that could migrate onto cards or Card Path elements.
Adjustments initially made at the factory typically remain operative for an extended
period and have no associated time- or use-based schedule for their employment.
Adjustments typically occur in response to a part replacement, a printer upgrade, or an
operational anomaly. Chapters four and five contain most of the referrals to the
adjustments contained here.
980264-001 Rev. B 6-1