Filter
Top Products
- 32 -
EO1-11116
MA-516-100 SERIES
Key Installation Setting
Condition for Setting: After all Daily and Periodical Resets
(refer to “NOTE on Condition” on page 22.)
Setting Procedure:
Use the S Key to turn the Control
Lock to the “BLIND” position.
(The BLIND position is the
unmarked step next to “Z”.)
→
OFF
Z
REG
X
SET
MGR
-
7
→
AT/TL
→
AT/TL
→
6
(BLIND)
To declare Key Installation
Setting.
Repeat for all the keys to be
newly installed, for location
changes, or for reading Key
Codes already set.
→
←
→
Only to read the Key Code currently set on the key.
Key Code (max. 3
digits; see the List
of Keys on the
preceding pages.)
Displays the
entered Key
Code in the
AMOUNT
portion, as it
is entered.
Depress the key to
be set with the Key
Code.
Displays the Key
Code set or read, in
the AMOUNT por-
tion.
........
Depress the [AT/TL]
key to complete the
Key Installation Set-
ting operation.
Blank Keyboard Sketch (for your planning aid)
456
123
789
0
( )
( )
AT/TL( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )( )( )
( )
( )
( )
( )( )
( )
( )
( )( )
( )
( )
( )
( )
( )( )
( )
( )
( )( )
( )
Fill in:
Key Name→
Key Code →
(Refer to the
“List of Keys”
on the preced-
ing pages)
For the Stan-
dard Keyboard
Layout, refer to
Chapter “9.
Keyboard” on
page 15.
( )( )
( )