Filter
Top Products
- 33 -
EO1-11116
MA-516-100 SERIES
NOTES 1. If Key Installation Setting is operated for the first time, all the keys are already set as in the
Standard keyboard Layout. Therefore, set only the keys that are to be changed as to their
locations or newly installed.
2. If a wrong code has been entered and the key has also been depressed (i.e., a wrong code has
been set on a key), enter the correct code and depress the key. The code entered last will be
effective.
3. If “0” is entered as Key Code, the key will be dead and its memory will also be closed. If “0” is
entered to the [DPT SHIFT] key (Key Code 107), each memory of the Department Nos. 21 to
40 will be closed.
4. Each of the keys programmed in this operation will have its memory (if any) opened automati-
cally. Installing the [DPT SHIFT] key makes each memory of the Department Nos. 21 to 40 open
automatically.
5. The [C] key, if once set with Key Code 95, may be used to clear an error, but it cannot be used
immediately after a Key Code entry (for the purpose of clearing the wrong Key Code error). If any
Key Code is entered and then the [C] key is depressed, that Key Code will be set on the key that
was once the [C] key.
6. On depressing the final [AT/TL] key, “0.00” is displayed in the AMOUNT portion, indicating that
the setting operation is completed. No printing occurs.
7. Use the Blank Keyboard Layout on the preceding page, if necessary, for your own keyboard plan
before starting the setting procedure.
8. Brief Information on Optional Keys:
[%+] (%+ Key) --- Key Code 70
It is used to add a percent rate to an individual sale entry item or the entire sale.
[ALL VOID] (All Void Key) ... Key Code 75
It is used to cancel the contents in the current sale all at once.
[CPN] (Media Coupon Tender Key) ... Key Code 80
It is another non-cash media key to finalize a sale.
[NS] (No-sale Key) ... Key Code 85, [#] (Non-add Number Print Key) ... Key Code 90
These keys are not necessary if the [#/NS] key is installed. If the [#/NS] is not installed, those
keys should be separately installed for Non-add Number printing and No-sale entries
respectively.
[OPEN] (Preset & Listing Capacity Open Key) ... Key Code 88
This is a dual-function key that has both [LC OPEN] and [PR OPEN] functions. By
depressing this key once, both of those functions will be effective.
[TX2/M] (Tax 2 Modifier Key) ... Key Code 98
It is used to reverse the tax 2 status.
[TXBL TL] (Taxable Total Key) ... Key Code 99
It simply reads the Taxable Total (sale total amount + taxes due) during a sale. Since the [ST]
can have the same function, it is usually not necessary. However, when the [ST] is
programmed to be used to obtain the sale total amount without taxes, [TXBL TL] is
necessary.