Filter
Top Products
SYSTem Subsystem
3–134
VX1410A & VX1420A IntelliFrame Mainframe Instruction Manual
SYSTem:IEMessage
Sends an interface event message from the VXI interface to the RS-232 interface
or vice versa. You can use a maximum of 32 data bytes in the message. There is
no query associated with this command.
When you send the command from the RS-232 interface, the interface event
message is placed in the VXI Error/Event queue as part of an event message.
When you send the command from the VXI interface, the interface event
message is placed in the RS-232 Error/Event queue as part of an event message.
The message in the Error/Event queue looks similar to the following message:
100,System Message; Your Message Here"
Event number 100 has to be enabled by the SYSTem:ERRor:QUEue:ENABle
command to place an event into the event queue.
SYSTem:IEMessage <Message>
<Parameter> Query response
<string> Not Applicable
Not Applicable
–223, “Too Much Data”
You attempted to send too much data in the string.
None
Command: SYST:IEM System Init"
None
Syntax
Parameters
Reset Value
Errors and Events
Dependencies
Examples
Related Commands