Filter
Top Products
Maintenance
8–18
VX1410A & VX1420A IntelliFrame Mainframe Instruction Manual
Perform the following steps to remove the EMI DIN shields:
1. Remove any modules surrounding the slots where you intend to remove the
Backplane EMI DIN shields. Refer to Figure 8–14.
2. Remove two 4-40 Torxdrive T-10 screws that secure each EMI DIN shield to
the backplane.
3. Remove EMI DIN shield from the backplane.
Install the EMI DIN shield by reversing the disassembly procedure.
Screws (2)
Polarization hole
Backplane EMI
DIN shield
Figure 8–14: Removing the backplane EMI DIN shields
Procedure 9: Removing
the EMI DIN Shields