Filter
Top Products
Getting Started
1–20
VX1410A & VX1420A IntelliFrame Mainframe Instruction Manual
Configuration
After installing the mainframe, you are ready to configure it for your applica-
tions. If you have not already done so, install your VXIbus modules in the
mainframe following the installation guidelines for your VXIbus module.
The IntelliFrame Mainframe is UL listed to UL 3111-1 and CAN/CSA C22.2
No. 1010.1 and is IEC 1010-1 compliant. You should use VXIbus modules with
the mainframe that are listed or designed to limit electric shock and fire.
H Investigate the possibility of fire hazards due to the availability of power
from the mainframe exceeding 150 W per slot. Use similar considerations
for VXIbus Modules that externally receive power greater than 150 W per
slot.
H Printed wiring boards should be flame rated UL 94V–1 or better.
H To prevent possible electrical shock, limit the voltage to the mainframe
interface or chassis to less than 60 VDC, 30 V
RMS
, or 42.4 V
pk
.
H Ensure that measuring inputs provide a means of limiting unintended
voltages that may reach the mainframe interface or chassis to less than
60 VDC, 30 V
RMS
, or 42.4 V
pk
.
Module Selection and
Design Guidelines