Filter
Top Products
Getting Started
1–14
VX1410A & VX1420A IntelliFrame Mainframe Instruction Manual
Latch is
located at
the rear.
Screws (5)
Track
Bracket
Screws (2)
Bracket
VXIplug&play
position key for
VX1410A/11A/20A
Screws (2)
Handle
Figure 1–6: Installing the rackmount kit hardware
3. Remove the five 8-32 screws from both sides of the mainframe.
4. Attach the left and right inside tracks to the sides of the IntelliFrame
Mainframe using five 8-32 flathead screws. Add a spacer plate between the
left track and mainframe, refer to the Replaceable Parts on page 9–15.
Orient the button latch so that it faces away from the mainframe and toward
the rear.
Use the following procedure to install the IntelliFrame Mainframe in the rack:
1. Identify the right and left slide-out track assemblies: find the date code label
on each assembly. The assembly to be mounted in the left side of the rack
(the side nearest the left side of the mainframe when it is mounted in the
rack) has a date code that ends with LH (for left hand). The right assembly
has a date code ending with RH.
2. Measure the distance between the front and rear rail of the rack.
Install the Mainframe
in the Rack