Filter
Top Products
HOW TO PLAY/STREAM VIDEO, MUSIC & PHOTOS - 56
WD SHARESPACE
USER MANUAL
Xbox 360 - New User Interface
1. Ensure that your Xbox 360 and WDShareSpace are powered on and connected
to your local area network.
2. From the main Xbox user interface, scroll to the My Xbox screen
3. Use the D-Pad and scroll to the right until you see Video, Music and Picture
Library options.
4. Select any one of these three options by pressing the A button on your controller.
The Select Source screen appears.
5. Select the WDShareSpace option based on the device name you created
previously and press the A button. You will see the media content stored on your
WDShareSpace unit.
6. Using the controller, scroll through to view and play your media content.
Playstation 3
1. Ensure that your Playstation 3 and WD ShareSpace are powered on and
connected to your local area network. You will see the main user interface with a
series of options displayed horizontally across your TV screen.
2. Using the directional buttons (left and right) on the PS3 controller, navigate to
Music, Photo or Video depending on which type of media you want to play, and
press the X button.
3. Using the directional buttons (up and down), scroll and select WDShareSpace
(or the new device name that you created previously) by pressing the X button.
You will now see a list of folders (Music, Photo and Video) to the right of the
WDShareSpace icon.
4. Make sure that you select the folder that corresponds to option you selected back
in Step 2. For example, if you select Photo from the main user interface screen,
open the corresponding Photo folder to the right of the WDShareSpace icon,
otherwise your content will not display properly.
Digital Picture Frames
The following are general steps for setting up digital photo frames:
1. Ensure that your WD ShareSpace is connected to your home’s local network and
is powered on.
2. Follow the user instructions provided with your wireless digital photo frame to
proceed through any initial setup or installation of drivers.
3. Using the navigation feature on your wireless digital photo frame, scan and detect
the WD ShareSpace on your network.
4. Depending on the brand of photo frame you have, you may need to access
Settings/Network Setup page in the user interface to establish connection so that
your photo frame can link to your WD ShareSpace. Please refer to your DMA’s
user guide for specific instructions.