Filter
Top Products
4-22 DocuTech 128/155/180 HighLight Color Operator Guide
Problem Solving
Figure 4-22
6. Slide the tray back into the printer until the tray latches and
press the Continue button to resume printing.
7. Discard any pages sent to the sample tray, purge tray, or
unused stacker bin when the misfeed was detected.
Incorrect paper size message
Perform this procedure when printing stops and a incorrect paper
size message appears on the controller.
1. Check the paper in the indicated tray. If the paper is not the
correct size for the job, either load the correct size paper or
select another feeder tray containing the correct size paper.
2. If the paper size is correct, press the Continue button to
resume printing. The message may have been caused by a
damaged sheet.
NOTE: In order to assure good print quality for your jobs, the
printer purges any dog-eared or skewed sheets. In addition, the
printer may stop and issue an incorrect paper size message.