Filter
Top Products
5-6 DocuTech 128/155/180 HighLight Color Operator Guide
Technical information
Table 5-3. Satisfaction guide for paper trays 3, 4, 5, and 6
NOTE: High volume printer configuration only
Weight Substance 16 to 110
(60 to 200 g/m2)
Weights outside the limits shown
are not recommended.
Substance 110 (200 g/m2) must
be long grain except 17 x 11 inch
(432 x 279 mm) substance 110
(200 g/m2) which must be short
grain.
Capacity 550 sheets, substance
20 (75 g/m2)
Type or
condition
Xerographic bond
paper in good
condition
Drilled stock, fanned
thoroughly
Slightly curled paper
Intermixed weights
Xerox vellum
Full cut tabs
Label stock
Adhesive drafting film
Paper with reinforced edges
Do not use excessively curled
paper
Substance 110 (200 g/m2) must
be long grain. Do not use short
grain.
Refer to the “Using various
stocks” section for any stock not
defined in this guide.
Stock
Reliable feeds may
be expected
Less reliable feeds may be
expected
Suggested alternatives
Stock
Reliable feeds may
be expected
Less reliable feeds may be
expected
Suggested alternatives
Size 8 x 10 inches to 17 x
11 inches (203 x 254
mm to 432 x 279 mm)
Smaller or larger sizes cannot be
used.
Weight Substance 16 to 110
(60 to 200 g/m2)
Weights outside the limits shown
are not recommended.
Substance 110 (200 g/m2) must
be long grain except 17 x 11 inch
(432 x 279 mm) substance 110
(200 g/m2) which must be short
grain.
Capacity 2600 sheets,
substance 20 (75 g/
m2)