Filter
Top Products
DocuTech 128/155/180 HighLight Color Operator Guide 3-7
Routine maintenance
For stock outside the recommended limits, refer to the
"Technical information" chapter in this guide.
Figure 3-4 Positioning the stack
8. Move the rear guide forward until it touches the edge of the
stack.
9. Lower the feed belt.
10. Close the tray slowly, but firmly, until it latches.
Using the custom transfer assist blade
The custom transfer assist blade in the printer assures good print
quality for your jobs. A kit is available allowing you to customize
the transfer assist blade for use with nonstandard paper sizes.
You cannot use the custom transfer assist blade for print jobs that
use more than one paper size. In addition, the following paper
lengths cannot use the blade: