Filter
Top Products
DocuTech 128/155/180 HighLight Color Operator Guide 5-11
Technical information
Table 5-7. Stock length impact on system performance
Paper stock rotation
This section identifies the limitations on the rotation of paper stock
in the DocuTech 128/155/180 HLC Bypass Transport when using
a third-party finishing device.
Background
Due to the physical limitations of the DocuTech 128/155/180 HLC
Bypass Transport, some paper stocks will be damaged or will jam
while being rotated. Currently, when using an external finishing
device that is not a Signature Booklet Maker, there is no message
Stock length Impact on performance
Over 11 inches (279
mm) to less than
11.7 inches (297
mm)
Over 11.7 inches
(279 mm) to less
than 13 inches (330
mm)
Over 13 inches (330
mm) to less than 14
inches
(356 mm)
Over 14 inches (356
mm)
The transfer assist mechanism is preset to
optimize image transfer for the exact stock
lengths of 11 inches (279 mm), 11.7 inches
(297 mm), 13 inches (330 mm), and 14 inches
(356 mm). Stock lengths falling between these
exact lengths present an increased risk for
bottom-edge deletions.
14.33 inches (B4
JIS)
Background, smudging, or white spaces may
occur when printing between the 14 inch area
and the edge of the paper.
10 inches (254 mm)
to less than 11
inches (279 mm)
Because the 11 inch transfer mechanism is
used for all stock lengths less than 11 inches
(279 mm), there is an increased risk of
contaminating the back side of sheets after
switching back to longer stock.
11.2 inches (284
mm) to less than
11.5 inches
(292 mm)
11.9 inches (302
mm) to less than
12.2 inches (310
mm)
13.5 inches (343
mm) to less than
13.7 inches (348
mm)
Unresolved stock size mismatch conflict
messages may occur for stock lengths in these
ranges. Job and stock programming work-
arounds may be required.