Filter
Top Products
DocuTech 128/155/180 HighLight Color Operator Guide 5-5
Technical information
the curl in the paper, refer to the “Routine maintenance” and
“Problem solving” sections of this guide.
Stock satisfaction guides
Table 5-1. Satisfaction guide for paper trays 1 and 2
Table 5-2. Satisfaction guide for paper tray 4 Interposer ONLY
NOTE: Production publisher configuration only
Stock
Reliable feeds may
be expected
Less reliable feeds may be
expected
Suggested alternatives
Size 8 x 10 inches to 9 x 14
inches (203 x 254 mm
to 229 x 356 mm)
Stock smaller than 8 x 10 inches
cannot be used.
For stock larger than 9 x 14
inches (229 x 356 mm), refer to
the tray 3 satisfaction guide.
Weight Substance 20 to 110
(75 to 200 g/m2)
Substance 16 to 19 (60 to 72 g/
m2)
Weights outside the limits shown
are not recommended.
Substance 110 (200 g/m2) must
be long grain. Do not use short
grain.
Capacity Tray 1 - 1100 sheets,
substance 20 (75 g/
m2)
Tray 2 - 600 sheets.
substance 20 (75 g/
m2)
For greater capacity, use tray 3.
Type or
condition
Xerographic bond
paper in good
condition Drilled
stock, fanned
thoroughly Tab stock
in perfectly flat
condition
Slightly curled paper intermixed
weight Transparencies Label
stock Adhesive drafting film
Paper with reinforced edges
Do no use excessively curled
paper.
Substance 110 (200 g/m2) must
be long grain Do not use short
grain.
Use transparencies with a white
stripe. Freshly printed offset
prints, use tray 3.
Refer to the “Using various
stocks” section for any stock not
defined in this guide.
Stock
Reliable feeds may
be expected
Less reliable feeds may be
expected
Suggested alternatives
Size 8 x 10 inches to 17 x
11 inches (203 x 254
mm to 432 x 279 mm)
Smaller or larger sizes cannot be
used.