2-16 DocuTech 128/155/180 HighLight Color Operator Guide
System components
Finisher
NOTE: Production publisher configuration only
Figure 2-10. Finisher
In the finisher, prints can be collated, and stitched or bound, as
required for a job. The following lists the finisher components:
1. Bindexer
2. Stitcher
3. Stacker
4. Binder
5. Binder tape reel
6. Stitcher wire spools
7. Top tray
The bindexer
NOTE: Production publisher configuration only
The bindexer is a three-bin sorter that collates the pages of each
print set. As the pages of the print set are fed to the bindexer, the
bindexer moves up and down to collate them.
The stitcher
NOTE: Production publisher configuration only
When the job requires stitched output, the stitcher cuts and inserts
the wire stitches into each print set. The stitch length is related to
such factors as the number of pages in the print set and the print
stock weight. A single stitch can be placed in the portrait or
landscape print position. Dual stitching is available for landscape
and portrait prints. Stitch placement can be changed through the
DocuSP software.
NOTE: For more information about setting stitch placement, refer
to the on-line help system.