Filter
Top Products
6-4 DocuTech 128/155/180 HighLight Color Operator Guide
Service and supplies
Routine maintenance
There are a number of routine maintenance tasks that must be
performed to ensure maximum efficiency of your printer. These
tasks include the following:
• Adding dry ink
• Cleaning the exterior surfaces of the system
Step-by-step instructions on performing these routine
maintenance tasks are contained in your DocuTech 128/155/180
Operator Guide.
You need to decide how many operators will be responsible for
performing these maintenance tasks. Most maintenance
procedures are covered in the initial operator training provided
shortly after installation.
Meter reading and reporting
As print jobs are processed, the DocuSP controller accumulates,
saves, and maintains usage data. During the last five working
days of each month, you need to review and transmit the data to
Xerox for billing purposes. Refer to the section on Billing in the
Help on the DocuSP controller for complete information on how to
view and print the billing meter readings.
Consumable supplies table
The following table lists the supplies that are available from Xerox
for your printer. Use this table to help you determine your printer
needs.
The following symbols are used in the table:
* 5/16-inch drilled holes
** Rainbow pack contains 750 sheets each of blue and yellow, 500
sheets each of green and pink, and 250 sheets each of buff, gray,
goldenrod, and ivory.
NOTE: Non-United States customers: The part numbers in this
table are for the United States only. Contact your local
representative for supplies ordering information.
CAUTION: Do not use any supplies not approved by Xerox. You
can damage the system by using supplies other than those
recommended.