Filter
Top Products
Chapter 9 DMZ Screens
ZyWALL 2 Plus User’s Guide
165
The following table describes the labels in this screen.
9.4 DMZ IP Alias
IP alias allows you to partition a physical network into different logical networks over the
same Ethernet interface.
The ZyWALL has a single DMZ interface. Even though more than one of ports 1~4 may be in
the DMZ port role, they are all still part of a single physical Ethernet interface and all use the
same IP address.
The ZyWALL supports three logical DMZ interfaces via its single physical DMZ Ethernet
interface. The ZyWALL itself is the gateway for each of the logical DMZ networks.
The IP alias IP addresses can be either private or public regardless of whether the physical
DMZ interface is set to use a private or public IP address. Use NAT if you want to make DMZ
computers with private IP addresses publicly accessible (see Chapter 17 on page 309 for more
information). When you use IP alias, you can have the DMZ use both public and private IP
addresses at the same time.
" Make sure that the subnets of the logical networks do not overlap.
To change your ZyWALL’s IP alias settings, click NETWORK > DMZ > IP Alias. The
screen appears as shown.
Table 40 NETWORK > DMZ > Static DHCP
LABEL DESCRIPTION
# This is the index number of the Static IP table entry (row).
MAC Address Type the MAC address of a computer on your DMZ.
IP Address Type the IP address that you want to assign to the computer on your DMZ.
Alternatively, click the right mouse button to copy and/or paste the IP address.
Apply Click Apply to save your changes back to the ZyWALL.
Reset Click Reset to begin configuring this screen afresh.