Filter
Top Products
Chapter 41 System Maintenance Menus 8 to 10
ZyWALL 2 Plus User’s Guide
566
The total budget is the time limit on the accumulated time for outgoing calls to a remote node.
When this limit is reached, the call will be dropped and further outgoing calls to that remote
node will be blocked. After each period, the total budget is reset. The default for the total
budget is 0 minutes and the period is 0 hours, meaning no budget control. You can reset the
accumulated connection time in this menu by entering the index of a remote node. Enter 0 to
update the screen. The budget and the reset period can be configured in menu 11.1 for the
remote node.
41.2.2 Call History
This is the second option in Menu 24.9 - System Maintenance - Call Control. It displays
information about past incoming and outgoing calls. Enter 2 from Menu 24.9 - System
Maintenance - Call Control to bring up the following menu.
Figure 399 Call History
The following table describes the fields in this screen.
Table 215 Budget Management
FIELD DESCRIPTION EXAMPLE
Remote Node Enter the index number of the remote node you
want to reset (just one in this case)
1
Connection Time/
Total Budget
This is the total connection time that has gone by
(within the allocated budget that you set in menu
11.1).
5/10 means that 5 minutes
out of a total allocation of 10
minutes have lapsed.
Elapsed Time/Total
Period
The period is the time cycle in hours that the
allocation budget is reset (see menu 11.1.) The
elapsed time is the time used up within this
period.
0.5/1 means that 30
minutes out of the 1-hour
time period has lapsed.
Enter “0” to update the screen or press [ESC] to return to the previous screen.
Menu 24.9.2 - Call History
Phone Number Dir Rate #call Max Min Total
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Enter Entry to Delete(0 to exit):
Table 216 Call History
FIELD DESCRIPTION
Phone Number The PPPoE service names are shown here.
Dir This shows whether the call was incoming or outgoing.