Filter
Top Products
Chapter 41 System Maintenance Menus 8 to 10
ZyWALL 2 Plus User’s Guide
567
41.3 Time and Date Setting
The ZyWALL’s Real Time Chip (RTC) keeps track of the time and date. There is also a
software mechanism to set the time manually or get the current time and date from an external
server when you turn on your ZyWALL. Menu 24.10 allows you to update the time and date
settings of your ZyWALL. The real time is then displayed in the ZyWALL error logs and
firewall logs.
Select menu 24 in the main menu to open Menu 24 - System Maintenance, as shown next.
Figure 400 Menu 24: System Maintenance
Enter 10 to go to Menu 24.10 - System Maintenance - Time and Date Setting to update the
time and date settings of your ZyWALL as shown in the following screen.
Rate This is the transfer rate of the call.
#call This is the number of calls made to or received from that telephone number.
Max This is the length of time of the longest telephone call.
Min This is the length of time of the shortest telephone call.
Total This is the total length of time of all the telephone calls to/from that telephone
number.
You may enter an entry number to delete it or ‘”0” to exit.
Table 216 Call History
FIELD DESCRIPTION
Menu 24 - System Maintenance
1. System Status
2. System Information and Console Port Speed
3. Log and Trace
4. Diagnostic
5. Backup Configuration
6. Restore Configuration
7. Upload Firmware
8. Command Interpreter Mode
9. Call Control
10. Time and Date Setting
11. Remote Management Setup
Enter Menu Selection Number: