Filter
Top Products
ZyWALL 2 Plus User’s Guide
589
APPENDIX A
Product Specifications
The following tables summarize the ZyWALL’s hardware and firmware features.
Table 220 Hardware Specifications
Dimensions (W x D x H) 181(W) x 128(D) x 36(H) mm
Weight 304g
Power Specification 12 V DC 1 A
Ethernet Ports Auto-negotiating: 10 Mbps or 100 Mbps in either half-duplex or full-duplex
mode.
Auto-crossover: Use either crossover or straight-through Ethernet cables.
Reset Button Restores factory default settings
Console RJ-45 port for RS-232 null modem connection
Dial Backup RJ-45 port for RS-232 connection
Operation Temperature 0º C ~ 50º C
Storage Temperature -30º C ~ 60º C
Operation Humidity 20% ~ 95% RH (non-condensing)
Storage Humidity 20% ~ 95% RH (non-condensing)
Certifications EMC: FCC Class B, CE-EMC Class B, C-Tick Class B, VCCI Class B
Safety: CSA International, CE EN60950-1
Table 221 Firmware Specifications
FEATURE DESCRIPTION
Default IP Address 192.168.1.1
Default Subnet Mask 255.255.255.0 (24 bits)
Default Password 1234
DHCP Pool 192.168.1.33 to 192.168.1.160
Device Management Use the web configurator to easily configure the rich range of features on
the ZyWALL.
Firmware Upgrade Download new firmware (when available) from the ZyXEL web site and
use the web configurator, an FTP or a TFTP tool to put it on the
ZyWALL.
Note: Only upload firmware for your specific model!
Configuration Backup &
Restoration
Make a copy of the ZyWALL’s configuration. You can put it back on the
ZyWALL later if you decide to revert back to an earlier configuration.