Filter
Top Products
Chapter 7 Network Setting
WiMAX Device Configuration User’s Guide
110
7.15.1 Port Trigger Wizard
Use the wizard to create a port trigger rules that will allow the WiMAX Device to automate port
forwarding and allow computers on local network to provide services that would normally require a
fixed address on the local network.
Click Network Setting > NAT > Port Trigger > Wizard
Figure 58 Port Trigger Wizard Screen
This screen contains the following fields:
Table 41 Port Trigger Wizard
LABEL DESCRIPTION
Active Select this to make this port trigger rule active.
Port Trigger Rule Select the type of port trigger rule.
Rule Name Enter a name for the port trigger rule.
Trigger Protocol Select the type of port trigger protocol.
Trigger Start Port Enter the port trigger start port.
Trigger End Port Enter the port trigger end port.
Open Protocol Select the type of open protocol for the port trigger rule.
Open Start Port Select the starting open port for the port trigger rule.
Open End Port Select the ending open port number for the port trigger rule.