Filter
Top Products
Chapter 12 Maintenance
WiMAX Device Configuration User’s Guide
193
Click Maintenance > LOG > Log Display to open this screen as shown next.
Figure 121 Log Display Screen
This screen contains the following fields:
12.19 Network Test
Use this screen to test network connectivity using ping.
Click Maintenance > Network Test > Ping to open this screen as shown next.
Figure 122 Ping Screen
This screen contains the following fields:
Table 97 Log Display
LABEL DESCRIPTION
Display Level Select the type of logs to display from this menu.
Refresh Click this to refresh the logs in the display window.
Table 98 Ping
LABEL DESCRIPTION
IP Address Enter the IP address or domain name of a target device to which this test will
send.
Ping Click this to start the test. The result will show at the bottom of the screen.