Filter
Top Products
Chapter 10 The VoIP Account Screens
WiMAX Device Configuration User’s Guide
163
10.4 SIP
Click VoIP > Account 1 (or Account 2) > SIP to configure SIP settings.
Figure 94 SIP
The following table describes the labels in this screen.
Table 72 SIP
LABEL DESCRIPTION
SIP Account
Enable Select this if you want the WiMAX Device to use this account. Clear it if you do
not want the WiMAX Device to use this account.
SIP Local Port
Enter the WiMAX Device’s listening port number, if your VoIP service provider
gave you one. Otherwise, keep the default value.
Subscriber
Number
Enter your SIP number. In the full SIP URI, this is the part before the @
symbol. You can use up to 1-31 printable ASCII characters.
Authentication
Name
Type the SIP user name associated with this account for authentication to the
SIP register server.
This field can be 1-31 printable characters (A-Z, a-z, 0-9).
Password Type the SIP password associated with this account. This field can be 0-31
printable characters (A-Z, a-z, 0-9), underscores (_), pluses (+), periods (.),
and “at” symbols (@).
Codec Settings