Filter
Top Products
Chapter 12 Maintenance
WiMAX Device Configuration User’s Guide
192
Click Maintenance > Backup/Restore > Factory Defaults to open this screen as shown next.
Figure 119 Factory Defaults Screen
This screen contains the following fields:
12.17 Log Setting
Use this screen to configure which type of events on the WiMAX Device are logged.
Click Maintenance > LOG > Log Setting to open this screen as shown next.
Figure 120 Log Setting Screen
This screen contains the following fields:
12.18 Log Display
Use this screen to view the log messages of the WiMAX Device.
Table 95 Factory Defaults
LABEL DESCRIPTION
Reset Click this to clear all user-entered configuration information and return the
WiMAX Device to its factory defaults. There is no warning screen.
Table 96 Log Setting
LABEL DESCRIPTION
Enable Log Select this to have the WiMAX Device log network activity according to the
selected Log Level.
Log Level Select the type of logs to record.
Enable Remote
Log
Select this to allow logs to be recorded and stored on a remote logs server.
Remote Log Host Enter the remote log host IP address if Enable Remote Log is selected.
Remote Log Port Enter the remote log host port if Enable Remote Log is selected.