Filter
Top Products
Chapter 8 Security
WiMAX Device Configuration User’s Guide
126
This screen contains the following fields:
8.3 MAC Filter
Use this screen to allow ("whitelist") or block ("blacklist") connections to and from specific devices
on the network based on their unique MAC addresses.
Note: This feature only works when the WiMAX Device is in bridge mode.
Table 50 IP Filter
LABEL DESCRIPTION
Active Indicates whether the current IP filter is active or not.
Source IP This displays the source IP address for the IP filter rule.
Click Add to create a new, empty rule, then enter the incoming IP address for
the WiMAX Device to block.
If you want to delete this rule, click the Delete icon.
Source Port This displays the source port number for the IP filter rule.
Click Add to create a new, empty rule, then enter the incoming port number for
the WiMAX Device to block.
If you want to delete this rule, click the Delete icon.
Destination IP This displays the destination IP address for the IP filter rule.
Click Add to create a new, empty rule, then enter the outgoing IP address for
the WiMAX Device to block.
If you want to delete this rule, click the Delete icon.
Destination Port This displays the destination port number for the IP filter rule.
Click Add to create a new, empty rule, then enter the outgoing port number for
the WiMAX Device to block.
If you want to delete this rule, click the Delete icon.
Protocol This displays the protocol blocked by the IP filter rule.
Click Add to create a new, empty rule, then select the protocol type for the
WiMAX Device to block.
If you want to delete this rule, click the Delete icon.
Delete Click this to delete a specified rule.
Add Click this to add a new filter rule.
OK Click this to save any changes made to the list.