Filter
Top Products
WiMAX Device Configuration User’s Guide 203
CHAPTER 14
Product Specifications
Table 102 LEDs Status for Indoor Device
LED STATE DESCRIPTION
Power Off The WiMAX Device is not receiving power.
Red The WiMAX Device is receiving power but has been unable to
start up correctly or is not receiving enough power. See the
Troubleshooting section for more information.
Green Solid: The WiMAX Device is receiving power and functioning
correctly.
Flashing: the device is self-testing (startup).
WiMAX Link Off The WiMAX Device is not connected to a wireless (WiMAX)
network.
Green The WiMAX Device is successfully connected to a wireless
(WiMAX) network.
Green (Blinking
Slowly)
The WiMAX Device is searching for a wireless (WiMAX)
network.
Green (Blinking
Quickly)
The WiMAX Device has found a wireless (WiMAX) network
and is connecting.
Signal
Strength 1,2,3
The Strength Indicator LEDs display the Interference-plus-Noise Ratio (CINR) of the
wireless (WiMAX) connection.
No Signal LEDs On There is no WiMAX connection.
Signal 1 On The signal strength is between -80dBm and -90dBm.
Signal 1 and 2 On The signal strength is between -70dBm and -80dBm.
Signal 1, 2 and 3 On The signal strength is greater than or equal to -70dBm.
Phone 1,2 (for
models with
VoIP feature)
Off No SIP account is registered, or the WiMAX Device is not
receiving power.
Green A SIP account is registered.
Green (Blinking) A SIP account is registered, and the phone attached to the
VoIP port is in use (off the hook).
Yellow A SIP account is registered and has a voice message on the
SIP server.
Yellow (Blinking) A SIP account is registered and has a voice message on the
SIP server, and the phone attached to the VoIP port is in use
(off the hook).
WLAN (for
models with
WLAN feature)
Off The Wi-Fi network is not operational.
Green The Wi-Fi network is operational.
Green (Blinking) The WiMAX Device is sending and receiving data across the
Wi-Fi network.